Pasticceriapenso

General blog for all

Uncategorized

Automatic Screw Locking Machine and its Constituents

Automatic Feeder Machine or Automatic Dispenser machine for screws

Automatic Prop Feeding machine and prop dispensers are typically used for manufacturing of appliances for the home. They are used for finishing prop locking in product assembly. They ensure the function of good packaging in products. Their dimensions typically are 1900 by 900 by 600 mm. Their run range is effectively 900 by 400 by 200 mm which can be adjusted based on the size of the product. The Electrical Automatic Screw Locking Machine setup is BM6-Z which is high precision with Unces axis component closed. It has a storage container which is THK KK-60, components that are SMC, motor driver from Panasonic, bits from The japanese that are from HIOS Screwdriver, touch screen from WEINVIEW, KEYENCE FOS and Vacuum tube from MISUMI.

That is the way the equipment works: Load the products hand, sets the jig position automatically, locking mode starts running automatically, lock prop is automatically finished, and then un-load the products hand. The equipment features an SHINE File scan of coordinates. It explores a Japanese people BM6-Z locking component and a screening feeder that is directly intelligent. The equipment automatically finishes locking the prop per the pre-set coordinates. The Replacement products merely need modification of point coordinates of PLC lock. The equipment has a yield that is At the top of first pass and is precise. At the same time, the prop quality of the lock is very stable and inherently reliable, the additional function features a slip prognosis in prop also includes a seapage prognosis of prop lock. The equipment also has a prop fluctuating lock recognition, statistics for bad screws and prognosis for prop in. It also has a CCD based visual programming feature, to ensure good accuracy and convenience. This machine is suitable to use for toys, computer, photoelectric and products made out of plastic.

Multiple Spindle in line Turn Automatic Tightening Machine or Automatic Buckling Machine for screws

The equipment dimension is based on product size and is typically about 1900 by 900 by 600 mm. Its XYZ dimensions typically are 800mm by 400mm by 200mm. Its power consumption varies from about 300W to 750W. The frame consists of a Steel plate, a oblong tube and an aluminium alloy frame. The mechanism is made up of Lead prop robot storage container, a servo motor and an Electrical/pneumatic combination. It features a self feeding BM6-Z feeding path for the screws. The lock speed of the prop depends on the length of the prop and route, it typically is 1. 5-2. 5 sec/time.

Most machines in this category have a maximum running speed of 500mm/s. These kinds of machines are applied to the finished product screws locking on assembly lines, to ensure that the products get a good function in packaging. These machines have a organize scan function from SHINE files. These Machines have an automatic locking prop finishing feature that works according to the pre-set coordinates. These machines boast of a top quality initial pass yield and accuracy. The standard of lock prop is reliable and stable.

LEAVE A RESPONSE

Your email address will not be published. Required fields are marked *